HPE Aruba Networking CX 6000 24G Class4 PoE 4SFP 370W Switch [R8N87A]
HPE PoE Switch R8N87A 370W PoE
주요기능
- Layer 2 - 802.1Q(512 VLANs), MVRP, xSTP, RPVST+
- Multicast – IGMP snooping, MLD v1/2, IGMP v1/2/3
- IPv6 – Dual Stack, MLD v1/2, IPv6 ACL/QoS, Static routing
- Security – Packet storm Protection, ACLs, RADIUS/TACACS+, 802.1x, WEB & MAC 인증, Port Security
- 고 가용성 – UDLD, 802.3ad LACP
- QoS – SP(Strict Priority) queuing, 802.1p, Large Buffer
- 관리 – CLI, RESR API Scripting, SNMPv1/2c/3, RMON, sFlow, NTP, LLDP
인터페이스
- 1G 24port downlink + 1G SFP 4port uplink
- 최대 370W Class4 PoE 지원
Layer 2 Switching
The following Layer 2 services are supported:
• VLAN support and tagging support for IEEE 802.1Q (4094 VLAN IDs) and 512 VLANs simultaneously
• Jumbo packet support improves the performance of large data transfers; supports frame size of up to 9,198 bytes
• Rapid Per-VLAN Spanning Tree (RPVST+) allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
• STP supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
• MVRP allows automatic learning and dynamic assignment of VLANs 3 DATA SHEET ARUBA CX 6000 SWITCH SERIES
• Bridge Protocol Data Unit (BPDU) tunneling transmits STP BPDUs transparently, allowing correct tree calculations across service providers, WANs, or MANs
• Port mirroring duplicates port traffic (ingress and egress) to a monitoring port; supports 4 mirroring groups
• Internet Group Management Protocol (IGMP) Controls and manages the flooding of multicast packets in a Layer 2 network
Layer 3 Services
The following Layer 3 services are supported:
• Address Resolution Protocol (ARP) determines the MAC address of another IP host in the same subnet; supports static ARPs
• Domain Name System (DNS) provides a distributed database that translates domain names and IP addresses, which simplifies network design; supports client and server
• Supports internal loopback testing for maintenance purposes and increased availability; loopback detection protects against incorrect cabling or network configurations and can be enabled on a per-port or per VLAN basis for added flexibility
Layer 3 Routing
The following Layer 3 routing services are supported:
• Static IP routing provides manually configured routes.
• Dual stack static IPv4 and IPv6 routing provides simple manually configured IPv4 and IPv6 routing
• Dual IP stack maintains separate stacks for IPv4 and IPv6 to ease the transition from an IPv4-only network to an IPv6-only network design