[HPE] ARUBA AP-725 (S4A22A) Wi-Fi 7 AP 데이타시트
HPE Aruba Networking 720 Series Campus Access Points
HPE Aruba Networking AP-725 (ID) Tri Radio 2x2 Wi-Fi 7 Internal Antennas Campus Access Point (S4A18A)
Certifications
Bluetooth SIG; Ethernet Alliance (PoE, PD device, Class 4)
Wi‑Fi Alliance (WFA):
- Wi‑Fi CERTIFIED a, b, g, n, ac, 6, 7
- WPA2 and WPA3
- Enhanced Open (OWE)
- WMM, W‑Fi Agile Multiband
Input voltage
PoE‑PD: 48Vdc (nominal) 802.3af/at PoE (Class 3 or higher);
Wi-Fi antenna
Integrated down-tilt omni‑directional antennas for 2x2 MIMO with peak antenna gain of
5.1 dBi in 2.4 GHz, 5.4 dBi in 5 GHz, and 5.4 dBi in 6 GHz. Built‑in antennas are optimized
for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain
is roughly 30 degrees
Connectivity, standard
Wi-Fi 7 (IEEE 802.11be)
Ports
E0: Ethernet wired network port (RJ‑45);
U0: USB 2.0 host interface (Type A connector);
Kensington security slot;
Serial console interface (proprietary, micro‑B USB physical jack);
Reset button: Factory reset, LED mode control (normal/off);
Visual indicators (four multi‑color LEDs) for System (1x) and Radio (3x) status
Mounting
A mounting bracket has been preinstalled on the back of the AP. This bracket is used to
secure the AP to any of the mount kits (sold separately). Optional mounting kits available,
see the 720 Series ordering guide.
Power consumption
Maximum (worst case) power consumption (without/with USB devices attached): 17.1W/22.8W.
Notes:
This assumes that up to 5W is supplied to the attached USB device.
Maximum (worst‑case) power consumption in idle mode: 7.0W/12.5W (PoE).
Maximum (worst‑case) power consumption in deep‑sleep mode: 3.5W (PoE).
Radio coverage
AP type: Indoor, tri radio, 2.4 GHz, 5 GHz and 6 GHz (concurrent) 802.11be 2x2 MIMO
Warranty
Limited lifetime warranty. See the warranty duration.