[CISCO] 시스코 C1300 시리즈 스위치
C1300-8FP-2G : 8 x Gigabit Ethernet / 2 x Gigabit Ethernet combo
C1300-8T-E-2G : 8 x Gigabit Ethernet / 2 x Gigabit Ethernet combo
C1300-8P-E-2G : 8 x Gigabit Ethernet / 2 x Gigabit Ethernet combo
C1300-16T-2G : 16 x Gigabit Ethernet / 2 x SFP
C1300-16P-2G : 16 x Gigabit Ethernet / 2 x SFP
C1300-16FP-2G : 16 x Gigabit Ethernet / 2 x SFP
C1300-24T-4G : 24 x Gigabit Ethernet / 4 x SFP
C1300-24P-4G : 24 x Gigabit Ethernet / 4 x SFP
C1300-24FP-4G : 24 x Gigabit Ethernet / 4 x SFP
C1300-48T-4G : 48 x Gigabit Ethernet / 4 x SFP
C1300-48P-4G : 48 x Gigabit Ethernet / 4 x SFP
C1300-48FP-4G : 48 x Gigabit Ethernet / 4 x SFP
C1300-16P-4X : 16 x Gigabit Ethernet / 4 x SFP+
C1300-24T-4X : 24 x Gigabit Ethernet / 4 x SFP+
C1300-24P-4X : 24 x Gigabit Ethernet / 4 x SFP+
C1300-24FP-4X : 24 x Gigabit Ethernet / 4 x SFP+
C1300-48T-4X : 48 x Gigabit Ethernet / 4 x SFP+
C1300-48P-4X : 48 x Gigabit Ethernet / 4 x SFP+
C1300-48FP-4X : 48 x Gigabit Ethernet / 4 x SFP+
C1300-8MGP-2X : 4 x Gigabit Ethernet + 4 x 2.5G / 2 x SFP+
C1300-24MGP-4X : 16 Gigabit Ethernet + 8 x 2.5G / 4 x SFP+
C1300-48MGP-4X : 32Gigabit Ethernet + 16 x 2.5G / 4 x SFP+
C1300-12XT-2X : 12 x 10G Copper / 2 x SFP+
C1300-12XS : 10 x 10G SFP+ / 2 x 10G copper/SFP+ combo
C1300-16XTS : 8 x 10G copper / 8 x SFP+
C1300-24XS : 20 x 10G SFP+ / 4 x 10G copper/SFP+ combo
C1300-24XT : 20 x 10G copper / 4 x 10G copper/SFP+ combo
C1300-24XTS : 12 x 10G Copper / 12 x 10G SFP+
Console port ; Cisco standard RJ-45 console port and USB Type C port
USB port ; USB Type C port on the front panel of the switch for easy file and image management as well as console port
Buttons ; Reset button
Cabling type ; Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
LEDs ; System, Link/Act, PoE, Speed
Flash ; 512 MB
CPU ; ARM dual-core at 1.4 GHz
DRAM ; 1 GB DDR4
Layer 2 switching
Spanning Tree Protocol
Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation
● Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
● Up to 8 groups
● Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN
- Support for up to 4093 VLANs simultaneously
- Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN
- Management VLAN
- Private VLAN with promiscuous, isolated, and community port
- Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN,
unauthenticated VLAN
- Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises
equipment (CPE) VLAN
- Auto surveillance VLAN (ASV)
Voice VLAN
- Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN
- Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN translation
- Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q
- VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q
- Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
- Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
- Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP)
- GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link
- UDLD monitors physical connections to detect unidirectional links caused by incorrect
Detection (UDLD)
- wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks
DHCP relay at Layer 2
- Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping
- IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported)
IGMP querier
- IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy
- The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols
Head-of-Line (HOL) blocking
- HOL blocking prevention
Loopback detection
- Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3
IPv4 routing
- Wire-speed routing of IPv4 packets
- Up to 990 static routes and up to 128 IP interfaces
IPv6 routing
- Wire-speed routing of IPv6 packets
Layer 3 interface
- Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR)
- Support for CIDR
Routing Information Protocol (RIP) v2
- Support for RIP v2 for dynamic routing
Policy-Based Routing (PBR)
- Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL)
DHCP server
- Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes
- Support for DHCP options
DHCP relay at Layer 3
- Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay
- Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets